Adjusting The Lateral Supports - Physipro Valdis MC Manuel D'utilisation

Adjusting the lateral supports

All of Physipro's lateral supports can be adjusted to improve trunk alignment and
stability. Please refer to the adjustment section for your model of lateral support.
Adjustable lateral support
Required tool: 4mm Allen key
Adjusting the lateral support to the occupant's torso
1. Slightly loosen screw C.
2. Position the lateral support as near
as possible to the occupant's torso.
3. Fasten screw C tightly.
4. Repeat these steps for the second
lateral support.
Adjusting the lateral support's vertical angle
1. Slightly loosen screw D.
2. Position the lateral support at the
desired vertical angle.
3. Fasten screw D tightly.
4. Repeat these steps for the second
lateral support.
Adjusting the lateral support depth and height
1. Slightly loosen screws E.
2. Position the lateral support's depth
and height by moving it in the
horizontal and vertical adjustment
slots.
3. Fasten screws E tightly.
4. Repeat these steps for the second
lateral support.
11
Valdis Backrest
D
D E
C