Installing The Lateral Supports (Option) - Physipro Valdis MC Manuel D'utilisation

Owner's manual

Installing the lateral supports (option)

The lateral supports offered with the Valdis
back post. The use of universal mounting clamps on all the lateral supports
offered, ensure height positioning precision and easy installation.
Installing the mounting clamps of the Adjustable or Foldable and adjustable
lateral supports
Required tool: 4mm Allen key
1. Open the mounting clamp by unfastening
screws A and loosening set screws B with a
4mm Allen key.
2. Open the zippers of the backrest post covers.
3. Install the mounting clamp on the back
post with the screw heads facing outwards.
4. Position the mounting clamp at the
desired height and tighten screws A and
set screws B.
5. Repeat these steps for the second lateral
support. Make sure that both mounting
clamps are positioned at the same height.
Installing the mounting clamps of the Fixed to
back post lateral supports
Required tools: 4mm and 5mm Allen keys
1. Open the mounting clamp by unfastening
screws A with a 5mm Allen key and
loosening set screws B with a 4mm Allen
key.
2. Open the zippers of the backrest post
covers.
3. Install the mounting clamp on the back
post with the screw heads facing outwards.
4. Position the mounting clamp at the
desired height and tighten screws A and
set screws B.
5. Repeat these steps for the second lateral
support. Make sure that both mounting
clamps are positioned at the same height.
backrest can be installed on ¾" to 1"
TM
Adjustable
Foldable and adjustable
A
A
10
B
A
A
B
B
B
B
B
Fixed to back post
A
A