Maintenance And Environmental Protection; Service Instructions - MeisterCraft MAS 180-22D Manuel D'utilisation

MC-5451330-Bedien-0909.qxd
Speed switching
With the Speed switch (10), two
different speed ranges can be selected.
• Switch position 1: 0–440 rpm for
turning screws in and out
• Switch position 2: 0–1 150 rpm for
screw-driving and drilling
The speed range to be selected is
determined by the respective material
and the planned activity, and is to be
determined through work on a
specimen.
CAUTION! Carry out changeover
with motor stopped only.
11 – Maintenance and
environmental
protection
Clean the case only with a damp cloth –
Do not use solvents! Then dry well. To
maintain capacity, we recommend
completely discharging and recharging
the battery every two months. Store
only fully charged batteries. They should
therefore be recharged from time to
time. The place of storage must be dry;
the ambient temperature must not fall
below 0 °C or rise above 40 °C.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2002/96 EC directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environmentally-friendly
recycling.
11.09.2009 16:34 Uhr
tools and disposed of separately in
accordance with relevant waste-
battery regulations. Batteries must
never be disposed of with domestic
waste!
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
12 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Please note additional hints given in
the operating instructions.
• MeisterCRAFT devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short time.
• A brief description of the defect speeds
up the faulttracing and repair time. If
within the guarantee period, please
enclose the guarantee document and
the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
Seite 65
ATTENTION! Batteries must be
removed from battery-powered
65