Dmx Linking; Starting Address - Chauvet DJ Shocker Panel 180 USB Manuel De Référence

Shocker™ Panel 180 USB QRG

DMX Linking

Starting Address

Master/Slave
Connection
IRC-6
(Infrared Remote
Control)
D-Fi™ USB
Connectivity
The Shocker Panel 180 USB works with a DMX controller. Information about
configuring Shocker Panel 180 USB for DMX operation is in the
User Manual, which
http://www.chauvetlighting.com. Information about DMX is in the Chauvet DMX
Primer, which
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
The Shocker Panel 180 USB has 2-, 5-, and 8-channel DMX personalities. To
ensure full access to all channels in each DMX mode, the highest recommended
DMX address for this product is 505.
The Shocker Panel 180 USB works in Master/Slave mode. Information about
configuring this product for Master/Slave mode is in the User Manual, which is
available from the Chauvet website: http://www.chauvetlighting.com.
The Shocker Panel 180 USB is compatible with the IRC-6 from Chauvet DJ. For
more information on the IRC-6 or to download instructions, go to the Chauvet
website: http://www.chauvetlighting.com.
IR Sensor
The Shocker Panel 180 USB is able to become a D-Fi™ wireless
receiver/transmitter with the use of the D-Fi™ USB from Chauvet DJ. Simply set
the DIP switch D-Fi™ receiving/transmitting channel, plug it into the USB port
then set the product's DMX personality and DMX address. Further instructions for
connecting and configuring this product for D-Fi™ USB operation are in the User
Manual.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the USB
port. Doing so may cause damage to the product.
Once plugged in, the D-Fi™ USB will take over the product. Wired DMX,
manual display control/menu buttons and IRC-6 will be unavailable until you
unplug the D-Fi™ USB. The priority levels are:
1. D-Fi™ USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
is available
is available from
6
from the Chauvet
the Chauvet
EN
website:
website