Bimar HP090 Notice D'instructions page 19

To start the appliance insert the plug in the power grip: press the button on the side in
pos.I, this should light up on the display
start the appliance press the "
The appliance can be used in two different modes:
-Normal: power, temperature and time are regulated by the control panel and the
remote control.
-Weekly program: power, temperature and time are regulated and preset for the 7
weekdays, they are activated by the remote control.
If there is no preset for the temperature the appliance will work for 12 hours and then
go into stand-by.
Normal mode.
L'apparecchio ha i seguenti elementi di regolazione e comando:
 Main switch(I/0) if it is in pos."I" the appliance is in stand-by, in pos. "0" the
appliance is off.
 The "
"button on the keyboard and on the remote control: starts ventilation
and activates the other functions. It puts the appliance in stand-by. This symbol
lights up on the display "- -".

The " "button on the keyboard and on the remote control: it defines power of
ventilation:
"I" (1000W): hot air
-
"I I" (2000W): very hot air
-
"- -" only ventilation
-
It lights up the symbol of the function activated on the display.

The button "
Area which contains the buttons for normal mode.
Area which contains the buttons to confirm the
selected mode.
Area which contains planning buttons.
" button and select the right mode.
"on the keyboard and on the remote control;
(it means the appliance is in stand-by) to
19