Before Installation - Bimar HP090 Notice D'instructions

 Do not expose the heater to the external weather conditions (sun,
rain, etc.).
 Do not move the appliance when it is in function.
 If the appliance should fall over or show signs of faulty operation,
disconnect the electrical cable immediately. Check that no part is
damaged and switch on after the appliance has been thoroughly
checked: in case of doubt, contact qualified professional
personnel.
 Do not move the appliance when it is in function.
 In order to avoid any risk of electrical shock, never immerse the
plug, the mains cable and the appliance in water or in any other
liquid.
 Never use the fan heater to dry damp garments.
 Unplug the appliance from the wall socket:
e. Before installation
f. In case of breakdown or fault
g. When the appliance is not in use
h. Before cleaning the appliance
 The appliance should not be installed near a wall socket.
 The wall socket has to be easy to reach in order to easily
unplug the appliance in case of emergency.
 Never use this heater in the immediate surroundings of a
bath, a shower or a swimming pool,
 In the case of a breakdown or fault, switch the appliance off
and have it checked by a professionally qualified technician;
repairs made by unqualified people can be dangerous and
render void the warranty.
 Do not pull on the power cord or the appliance to unplug the
appliance from the wall socket. Never move the appliance
16