Start Measuring E - A&D Medical LIFE SOURCE PLUSCONNECT UC-350CNBLE Manuel D'utilisation

Start Measuring
Initializing Your Scale
1. Position the scale on a flat, hard surface. Carpeted or
uneven floors may affect accuracy.
2. Press the platform centre and remove your foot.
3. "0.0" will be displayed.
4. The scale will switch off and is now ready for use. This
initialization process must be repeated if the scale is
moved. At all other times step straight on the scale.
Setting the User ID and Start Measuring
• Press "SET" button or when the LCD displays 0.0, press and hold "SET" button
for about 3s to select your "P#".
• Once "P1" flashes, press the function button  or  to select your "P#" among P1
to P8. Press "SET" button to lock it. Once the initial User ID is set up, a single user
doesn't have to repeat this process each time because the scale will remember you.
• After setting your "P#", step on the platform when the scale displays "0.0". Stand
still and keep full contact with the scale until the unit (lb/kg) stops flashing. Then
the weight is locked.
• When your scale is successfully paired with your smartphone and the Bluetooth
is ON, it will process data transmission automatically. (Please refer to Data
Transmission for more details.)
Be sure to select your "P#" on the scale.
Guest User should select "P8".
If you forget your "P#", confirm in the app dashboard.
Your "P#" is displayed below the scale illustration.
Beep
E-7
Beep