Measuring Your Weight - A&D Medical UC-355PBT-Ci Mode D'emploi

Measuring Your Weight

Step On Weighing
Confirm that the scale is
1.
turned off, and step on
the scale gently.
 Measurement starts when you step
on the scale.
 A progress bar is displayed during
measurement. Stand up straight and
remain as still as possible during
measurement.
Step off the scale when
2.
"StEP" and "oFF" are
alternately displayed
with three beeps.
 If you do not step off, the scale
beeps every two seconds.
 The scale turns off automatically
after 2 minutes.
 All display segments are indicated
when you step off the scale.
 Do not touch the scale while all
display segments are indicated.
It may cause misreading.
Confirm the
3.
measurement results.
 The scale turns off automatically 15
seconds after the measurement
results are displayed.
 Data is automatically sent to the
receiver if the receiver is in the
receivable state.
 If the scale is not paired with a
receiver, the data is stored in the
scale memory.
(See "Transmitting Temporarily
Stored Data (P.11)".)
 Data stored in the scale memory
cannot be viewed on this scale.
 You can also shut the power off by
pressing the switch.
English 9
≪♪Beep≫
≪♪Beep beep beep≫
in
c
lb
g
k
k g