Data Transmission - A&D Medical LIFE SOURCE PLUSCONNECT UC-350CNBLE Manuel D'utilisation

Start Measuring

Data Transmission

• Once the Weight Scale UC-350CNBLE is successfully
paired-up with your smartphone, please open the
"A&D Connect" app and turn on your Bluetooth.
Keep smartphone and scale in transmission distance.
Step on the scale and take a measurement. Once
the measurement is finished the data is automatically
transferred to the app.
• The symbol
successful data transmission,
and you may check your personal
health data stored in your
smartphone.
• If the data is not transmitted to a
paired phone, the symbol
remain. The pending measurement
data will be temporarily kept in
the scale and transmitted to your
smartphone when next connection
is complete.
Note: When the data transmission is successful, the device will shut down automatically 3 seconds later.
Multiuser
Up to 8 people can use and store readings on the weight scale (7 registered users
and 1 guest can share the scale).
• To add new users, select User ID that is not assigned already in the Device
Setup process on the app (pg. E-5 and E-6). If all 7 User IDs are occupied, you
can overwrite one by simply selecting it.
• Be sure to select the correct "P#" on the app and the scale for each user.
Guest Users should select "P8".
• Once the correct User ID is selected, follow the steps for Start Measuring.
will disappear after
will
Data transmitting
Data ready to transmit to
the app:
• If SUCCEED, the symbol
disappears;
• If FAIL, the symbol remains.
E-8