Safety Guidelines - Definitions; General Power Tool Safety Warnings - Porter Cable PC70THD Manuel D'instructions

Marteau perforateur à deux vitesses de 7,0 a, 13 mm 1/2 po

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

It is important for you to read and understand this manual. The information it contains

relates to protecting yoUR SAfeTy and PReVeNTING PRoBleMS. The symbols

below are used to help you recognize this information.

DANGeR:

will result in death or serious injury.

WARNING:

could result in death or serious injury.

cAUTIoN:

may result in minor or mod er ate injury.

NoTIce:

Used without the safety alert symbol indicates potentially hazardous

situation which, if not avoided, may result in property damage.

General Power Tool Safety Warnings

WARNING:

the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warningS and inStructionS for future reference

The term "power tool" in the warnings refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

1) WoRk AReA SAfeTy

a) keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) elecTRIcAl SAfeTy

a) Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a ground

fault circuit interrupter (GfcI) protected supply. Use of a GFCI reduces the

risk of electric shock.

3) PeRSoNAl SAfeTy

a) Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, nonskid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. ensure the switch is in the off position

before connecting to power source and/ or battery pack, picking up

or carrying the tool. Carrying power tools with your finger on the switch or

energizing power tools that have the switch on invites accidents.