Napoleon BILEX730 Mode D'emploi page 18

18
BUILT-IN UNIT OPENING DIMENSIONS
EN
MODEL
W
BILEX730 43 1/4"
1099mm
SIDE 12 3/4"
BURNER 324mm
WARNING!
serviced by a qualified installer to local codes.
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance. Do
not use wood or drywall.
Note: Accessory frames
overlap opening by 1 ¾"
( on all 4 sides.
4cm)
MINIMUM 10 SQ IN (65cm
OF VENTILATION REQUIRED ON
EACH END OF CABINET
WARNING!
FROM NON-COMBUSTIBLE MATERIAL.
www.napoleongrills.com
OPENING DIMENSIONS
D H
21 3/8" 7 1/2"
543mm 191mm
16 1/2" 4 1/2"
419mm 114mm
This grill is designed for Non-combustible enclosures only, and must be installed and
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
34" (864mm)
RECOMMENDED
2
)
CABINET FRAME, CABINET AND COUNTER TOP MUST BE MADE
NOTES
OPENING OF AT LEAST 5 SQ (32cm
COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
H
H
WARNING!
below the gas grill.
2
) IN MUST BE PROVIDED FOR
A propane tank can not be stored
N415-0326 JAN 26.18