Pioneer XDP-30R Mode D'emploi page 13

> Before Start > Part Names
∫ The play screen
Screen A
1
2
3
4
1. Play/pause ( )
2. Skipping ( )
Skip to the beginning of the track or to
the previous track.
3. Return to the list of tracks.
4. Switches to the home screen.
5. Tap to display the album art.
6. Skipping ( )
Skip to the next track.
7. Seek bar
Progresses along with the track's
progress. By swiping left or right from the
current play position, you can move the
play position to the position where you
lift your finger.
8. Switches to screen B.
> Initial Setup
Screen B
5
9
6
10
11
7
8
9. Audio Adjust
You can set to your preferred sound
quality (P21).
10.Switch output between "Headphone",
"Line Out", or "Bluetooth".
0 When "Line Out" is selected, output
through the headphone jack is at
maximum volume, so do not use
headphones. Adjust the volume on
the connected device.
0 "Bluetooth" is displayed when
BLUETOOTH is on and a
BLUETOOTH wireless technology
enabled device is connected.
11. Shuffle mode
You can switch shuffle play on or off by
tapping this. " " is displayed on the
> Playback
status bar on the screen when this is on.
12.The track being played is added to the
play list (P14).
13.Repeat mode
Tap to change the mode: 1 track repeat‚
# all track repeat ‚# no repeat. "
is displayed on the status bar on the
screen when 1-track repeat is set, and
" " is displayed for all-track repeat.
12
0 1-track repeat cannot be set when the
shuffle mode is on.
14.Switches to screen A.
13
14
Advanced Setup | Supplementary Information | Others
"
En 13