CAPITAL SPORTS Aeris Mode D'emploi page 38

EN
2
Insert Trunk line (No. 88) through Seat Post (No.74). Then attach the Handlebar
(No.78) to Handlebar Post (No.74) using 3 Screws (No. 76), 3 Spring washers (No. 10),
and 3 washers (No. 11). Tighten with an Allen Wrench (No.A). (Figure B)
Loosen and pull out the Knob (No. 13). Insert the Handlebar post (No. 74) with Trunk
line (No. 88) into Main frame (No. 81) at desired position, put back and secure with the
Knob (No. 13). Connecting Trunk line (No.88) with Sensor Wire (No. 89). (Figure A)
38