Product Description; Installation Examples; Approvals And Markings; Design And Operation - DOLD SAFEMASTER STS/K V/K Mode D'emploi

Safety Technique
SAFEMASTER STS/K
Safety switch- and key interlock system
Padlock modules V/K and W/K
Presentation:
key extracted

Product Description

The padlock module V/K is assembled together with other modules into
an STS/K unit and can be locked with a padlock. It is hung up on the
nonremovable key. The key is used thereby for unlocking or locking of
functions. The module can be installed in 4 positions, each rotated by 90°.
ATTENTION !
Mechanical function modules can be installed above and/
!
or below the key module!
Electrical modules can only be installed below the key
module!

Installation Examples

ZRHV01BM/K SXV02M/K
(Fig. incl. accessories)
All technical data in this list relate to the state at the moment of edition. We reserve the right for
technical improvements and changes at any time.
STS/K-System Benefits
• EU-Test certificate according to the directive 2006/42/EG, annex IX
• For safety applications up to PLe / Cat. 4 acc. to DIN EN ISO 13849-1
• Modular and expandable system
• Rugged composite version of stainless steel and FRP design
• Wireless mechanical safeguarding
• Combines the benefits of safety switch, solenoid locking and
• Easy installation through comprehensive accessories
• Protection against lock-in
• Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Features
• Permits personal influence on a safety concept
• For up to 3 padlocks with shackle diameters from min. 6 mm to
• Module expansions possible below and above the module
• Allows blocking of entries and control elements
• Choice of direction in 4 increments of 90°
• This module is also available in stainless steel

Approvals and Markings

Design and Operation

Robust and flexible padlock reliably monitoring locking by mechanical
means, e.g. of protective hood or door, switch or door lock, thus enabling
personal protection measures.
To fulfil its function, the module must be used in connection with other
function modules such as switch, solenoid lock, actuator or key modules.
These modules are always installed at a strategic location in the system
to ensure forced operation.
The padlock module therefore offers the operating personnel the possibility
of taking control of their own safety.
Example M10VBM/K
A key must first be inserted here in the key module and the key on the
padlock module must be subsequently pulled. Only then can it be secured
with a padlock before a door or hood can be opened. The removal of the
key on the padlock locks the key module 10/K and unlocks the actuator
module B/K. Hooking in the padlock in this case serves as a personal
security measure against being locked in.
SXVBM/K
7
key transfer in a single system
max. 8 mm
SAFEMASTER STS/K Padlock modules V/K and W/K / 08.09.20 en / 288A