Pc-Scanning; Scanning From A Windows Application - Ricoh 180 Manuel D'utilisation

Scanning from a Windows Application

Scanning is available through any Windows application that supports a TWAIN
interface.
This section provides simple explanations about scanning from a Windows ap-
plication. The actual procedure you need to perform differs somewhat depend-
ing on the application you are using. For full details on scanning, refer to the
manual for the application.
Note
It functions as a scanner for TWAIN applications compliant with Windows
95/98 and Windows NT 4.0.
A
Set the document to be scanned.
Reference
For details, refer to "Faxing" in Facsimile Operator's Manual.
B
Access the WinStyler T180 Scanner Options from your Scanner Software.
C
Adjust the settings for this type of scan.
Note
The settings that can be used are Scan mode, Resolution and Brightness.
Depending on the application being used, you may not have access to all
these settings.
D
Click on [OK] to scan the document.
Note
After starting to enter a telephone number, the PC Scan function cannot be
used.
When you scan the document from the Auto Document Feeder and your doc-
ument is longer than the scan size length dimension, the entire length of the
document will be scanned in, and the resulting image will be taken from a
longer region than specified.

4. PC-SCANNING

15