How To Enable The Pcl Interpreter From Windows - Ricoh 180 Manuel D'utilisation

PC-PRINTING

How to Enable the PCL Interpreter from Windows

The PCL Interpreter must be enabled, or turned on before the PCL Control Panel
can be used to adjust the settings of a print job. Adjustments made to the PCL
Control Panel will have no affect on print jobs made from Windows applica-
tions. These settings will only affect print jobs that are made with applications
running in DOS.
A
Click on [Start] on the Task bar.
B
Point to [Programs].
C
Point to [WinStyler T180 Tools].
D
Click on [Printer Console].
E
Click on [DOS] on the Printer Console.
F
Click on [Enable PCL Interpreter] in the Printing Mode drop-down list box.
G
Click on [OK].
- Downloading Macros and Fonts -
- -
• The PCL Interpreter must be enabled, or turned on before macros and fonts
can be installed and used.
• The WinStyler T180 will preserve downloaded macros and fonts until the
printer is turned off.
Note
The macros and fonts must be compatible with PCL4.5.
You can get more information about PCL4.5 from the User's Manual for HP
LASER JET IIP.
14