Windows 95/98 - Printing From A Dos Application; How To Access The Pcl Control Panel From Windows - Ricoh 180 Manuel D'utilisation

Windows 95/98 — Printing from a DOS
Application
The WinStyler T180 was designed to print from DOS applications as well as
from Windows applications. The WinStyler T180 also provides a PCL Control
Panel for DOS PCL printing. This allows you to change the printer settings of
DOS print jobs.
Note
This function only works in Windows 95/98.
Some DOS applications may override these settings.
No cartridges required
• Some conventional printers include cartridge slots that allow you to install
additional fonts into the printer. Since the WinStyler T180 creates printer
page images on your system before downloading to the printer, installing
a cartridge could not affect the final printout. Instead, the WinStyler T180
uses the fonts installed in your Windows system.
The WinStyler T180 PCL is compatible with PCL4.5.(HP LASER JET IIP)

How to Access the PCL Control Panel from Windows

Adjustments made to the PCL Control Panel will have no affect on print jobs
made from Windows applications. These settings will only affect print jobs that
are made with applications running in DOS.
A
Click on [Start] on the Task bar.
B
Point to [Programs].
C
Point to [WinStyler T180 Tools].
D
Click on [Printer Console].
E
Click on [PCL] on the Printer Console.
Windows 95/98 — Printing from a DOS Application
13