Setting Up - Software; System Requirements; Operating System; I/O - Ricoh 180 Manuel D'utilisation

2. Setting up — Software

System Requirements

Operating System

Windows 95/98, Windows NT 4.0
PC
Any computer which meets with the requirements specified by Microsoft for
running Windows 95/98 or Windows NT 4.0, can support the WinStyler T180.
For optimal performance, the following CPU's are recommended.
Windows 95/98 Pentium 120 MHz
Windows NT 4.0 Pentium 166 MHz
Note
The WinStyler T180 cannot run on a 286 or earlier system.

I/O

Standard PC parallel printer port and cable.

Memory

Check the amount of memory of your PC. Adding more memory to your PC will
increase overall system and printer performance.
Recommended memory:
Windows 95/98 32MB
Windows NT 4.0 64MB

Disk Space

About 4 MB disk space for files, and up to approximately 12 MB disk space for
virtual memory. You can access Virtual Memory settings through the System
utility in the Control Panel.
If you have more than 8 MB RAM, you won't need all 12 MB of virtual memory.
Total PC RAM plus virtual memory should add up to at least 16 MB.
7