Trimming Operation - Shindaiwa BP530 Manuel D'utilisation

Trimming operation

Always stop the engine when a cutting attachment jam occurs. Do not attempt to remove an object causing a jam if the
engine is running. Severe injury can occur if a jam is removed and the cutting attachment suddenly starts.
1. Harness
Trimming operation
DANGER
Never attempt to operate the product with one hand.
Ensure that you hook your thumbs around the grips, wrapping
them in your thumb and remaining fingers.
Wearing the harness
1. Holding the shaft tube with your right hand, place the left-
side strap on your left shoulder
2. Hold the shaft tube with your left hand and place the right-
side strap on your right shoulder.
3. Fasten the waist belt.
4. Adjust the length of the right and left straps so that the back-
pad rests just above the hip.
5. Adjust the length of the shoulder-pad straps so that they stay
in place on both shoulders.
6. Adjust the length of the waist belt so that the pad properly
stays on your back.
26