Publicité
Les langues disponibles
Les langues disponibles
EN
•
In Sub stream menu page select "Default" and check that the factory default parameters are set.
Select "Copy" to copy the same parameters to all the channels and click on "Save" to save parameters in
the cameras.
•
In Mobile stream menu page select "Default" and check that the factory default parameters are set.
Select "Copy" to copy the same parameters to all the channels and click on "Save" to save parameters in
the cameras.
IMPORTANT
These factory settings are the suggested ones for video streams in order to obtain the right balance
between video quality and fluidity, in locally and remotely recording and LIVE displaying.
However, it is possible to manually set stream parameters different from the factory ones described
above.
3. After configurations in the Recording menu have been completed, save these changes and check that, after
exiting from the device menu, the icon "R" is displayed for each channel in LIVE mode; this icon indicates that
the device is recording according to configurations.
DS1093-513A
32
Publicité
Chapitres
