Urmet H.264 Mode D'emploi page 31

The device manages two different video streams for each analogue input and up to three different video streams
for each IP input as follows:
• Main stream: max. resolution stream, used for video-recording on hard disk and displaying on local network
• Sub stream: medium/high resolution stream, for remote displaying
• Mobile stream: optional stream to be activated only if supported by the IP camera. This is a low resolution
stream for remote viewing.
To configure each stream open the OSD menu page "Network" and select the stream to be configured:
• In Main stream menu page select "Default" and check that the factory default parameters are set.
Select "Copy" to copy the same parameters to all the channels and click on "Save" to save parameters in
the cameras.
31
EN