Replacing The High Beam Bulb - MV Agusta BRUTALE 2011 Manuel De Maintenance

1.13.3. Replacing the high beam bulb

Remove the headlight from its support as described
in paragraph 1.13.2.
To take the headlight lamp out, pull the connector
outwards.
Detach the burnt-out bulb from the connector.
Insert the new bulb in the connector.
Fit the connector back in the headlight and slightly
press it into its housing to secure it.
Replace the headlight on its support, following the
instructions described in paragraph 1.13.2.
MAINTENANCE
- 43 -
1
1