How To Select The Mapping Of The Control Unit - MV Agusta F4 RR Manuel De L'utilisateur

4.4.10. How to select the mapping of the control unit

On the F4 RR model it is possible to select different con-
trol unit mappings which allow to obtain variable power
and performance characteristics based on the type of
vehicle use.
NOTE
The mapping selection may be performed
even during the use of the vehicle.
4
The mapping of the control unit can be selected by
pressing the start button when the engine is switched
on; this way the mapping switches to the following setting
value. The corresponding mapping characteristics are
listed in the following table.
Mapping
Mode
Normal
N R S
Rain Sports
OPERATION
C
Customised
- 64 -
4