Maxx-world JC-228 Mode D'emploi page 16

EN
• Never remove the water tank cap when the device is in use! Al-
ways make sure that the water tank is completely closed before
you use the device.
• ATTENTION Scalding hazard! Only hold the device by the han-
dle during operation.
• ATTENTION! Tripping hazard! When using the device, lay the
mains cable so that there is no risk of anyone catching them-
selves on it.
• ATTENTION Scalding hazard! The fl oor cloth or cleaning head
may be very hot during and shortly after use. For this reason,
wait a few minutes for the fl oor cloth or cleaning head to cool off
completely before you remove it.
• ATTENTION Scalding hazard! Let the device and the fl oor cloth
cool off completely before you clean it, disassemble and/or stow it.
Risk of electric shock and fi re
• In the interest of your own safety, check the device, the mains
cord, and the mains plug for damages before each use. Only
use the device when it is in a fully functional state.
• Never attempt to repair an electrical device or replace parts
yourself. In the event of defects, the device may no longer be
used. Contact the nearest customer service centre/qualifi ed pro-
fessional or, in the event of damage, contact customer service.
• In the event of damage/malfunctions, turn off the device
immediately.
• Only connect the device to a properly installed socket. The
socket must also be easily accessible after the device has been
connected. The mains voltage must correspond to the techni-
cal data of the device. Only use proper extension cords, whose
technical data correspond to those of the device.
• Lay the mains cord such that it is not crushed or creased and
such that it does not come into contact with hot surfaces.
• Do not use the device in rooms containing easily fl ammable
dust or toxic and explosive vapours.
• Never immerse the device in water or other liquids. Make sure
that the device, the mains cord or the mains plug do not fall in
16