Display Features - Raymarine T112-916 Guide De Démarrage Rapide

Display Features

1 Set Button
3 Setup Button Prompts
Battery level
5
Charge Rate
7
Switching on and off
To switch the display on or off,press the
button and hold for two seconds
Backlighting
To adjust the display backlighting press and hold the
button for two seconds. Then use the
select from OFF, or levels 1,2,3. To save power, setup can be
used to set individual displays to local backlight control;
otherwise the backlight function will set the backlight level for all displays on
the network.
Power Management and Battery Life
Power status is shown by two icons : battery level
The more bars showing, the higher the battery level/rate of charge.
Note: If the internal battery is fully charged, the charge rate icon will always
indicate low.
Artificial light WILL NOT recharge the battery. Placing your Micronet
display close to an artificial light will seriously damage the display. Only
recharge in natural daylight.
If the displays are to be stored for a long period of time before next use
ensure that the batteries are fully charged before storage. If necessary
connect to a 9 to 30V DC power supply for 24 hrs prior to storage, using
external power leads.
www.raymarine.com
Chapter Button
2
Alarm Indicator
4
Page and Adjust Buttons
6
and buttons to
and charge rate
Display Features
.
1