ViewSonic ViewPad 7e Guide De L'utilisateur page 17

After installing the memory card and charging the battery, the device is ready to be turned
on.
Press and hold the Power button
turns on.
1. Press and hold the Power button
2. Tap Power off, and then select
To set the device to sleep mode, press the Power button
To turn the display on, press the Power button
1. Press and hold the Power button
2. Tap Silent mode.
To undo silent mode, slide
To press Power button
reset the device.
after being idle for a period of time. You can set the length of screen timeout until the
1. Press the Power button
2. Drag the
on the left top of your device until the device display
until a pop-up window appears.
again.
until a pop-up window appears.
to the left.
to the left.
and button
to turn on the display from sleep mode.
5
. This will turn the display off.
at the same time for 3 seconds will