Voltage-Thresholds Tab; Sensitivity Tab - MGE UPS Systems Pulsar Evolution 1500 Manuel D'installation Et D'utilisation

Voltage-thresholds tab

Upper threshold for transfer to battery power
Lower threshold for transfer to battery power
(1) Lower threshold for transfer to battery power = 150 V

Sensitivity tab

For more informations about these settings, refer to the Help function of the "UPS Driver" software.
Configurable function
Output voltage on battery power
Fader-mode cut-in threshold
Booster-mode cut-in threshold
Maximum input-voltage range
Configurable function
UPS sensitivity level
Default setting
230 V
294 V
265 V
184 V
160 V
Disabled
Default setting
Normal
3. Operation
Options
200 V - 220 V - 240 V
271 to 294 V
244 to 265 V
184 to 207 V
160 to 180 V
(1)
Enabled
Options
High or low
- Page 21
34007117EN/AB