Lamborghini Caloreclima ECO 22 Notice D'installation Et D'entretien page 48

It is sufficient of take off the cover in order to reach the main components.
Maintenance of the combustion headshould be carried out as follows:
● Take out the screws and take off the cover.
● Unscrew and take out the over-head plate and place it in service position.
● In order to reach the fan, remove the screws from the lower plate to unhook the electrical
coupling.
CHOKE ELECTRODES (30/2-40/2)
After removing the cover, detach the hi-
gh-tension cables from the transformer
side, remove the photo resistance
1, unscrew the connector that hooks
the fuel line to the choke 3, (there are
two 2 connectors for ECO 30/2 –ECO
40/2), loosen the screws 4 and, turning
the flange anti-clockwise, remove the
flange-choke-deflectorelectrode
assembly.
Remove the screws 5, in order to remove the deflector, and the screws 6 to remove the elec-
trodes. The choke may be cleaned adequately by removing the filter and cleaning inside the
spray nozzle and jet with gasoline and a light oil rinse. Re-assemble all parts carefully with
special attention to the positioning of the electrodesdeflector.
UK
48