Configuration; Finding The Interface Adapter In The Network; Devicediscoverytool - Resol VBus/Modbus Manuel

5

Configuration

Configuration for RPT
In order to use RPT, the VBus access over local network has to be enabled,
see chap. 7.11 on page 27.
Connection in the network
device
Interface adapter
Connection in the network
The device can be connected to the network via LAN, in order to access the
controller with the RPT Parameterisation Tool or to configure the device over the
Web interface. For further information, see:
chap. 3.3 LAN connection on page 21
chap. 6 Finding the interface adapter in the network on page 23
chap. 7.9 Network configuration on page 26
chap. 7.11 Configuring the remote access on page 27
Router
• RPT
• Interface adapter
Web interface
6

Finding the interface adapter in the network

6.1

DeviceDiscoveryTool

The DeviceDiscoveryTool is a software that displays products that are connected
directly via the local network.
Starting the DeviceDiscoveryTool from the included CD
Note
Starting the DeviceDiscoveryTool from the CD is possible under a Win-
dows operating system only. To start the DeviceDiscoveryTool, Java (ver-
sion 6 or higher) must be installed on the computer.
In order to start the DeviceDiscoveryTool from the included CD, proceed as follows:
Î Open the DeviceDiscoveryTool folder.
Î Start the Start DeviceDiscoveryToolSetup.exe.
Î Confirm all following dialogues with OK.
Î Click Start/Programs/RESOL/DeviceDiscoveryTool/
DeviceDiscoveryTool.
All LAN-enabled products found will be displayed.
Î Mark the VBusModbus-{12-digit serial number} interface adapter by clicking on it.
Î Click Open.
A new window with the Web interface will open.
Î Enter the user name and the password, see chap. 7.1 on page 24.
The Home screen of the interface adapter Web interface will open.
Note
The user name is admin. The password can be found at the back of the
housing (Web-interface).
23