Indication And Operating Elements; Operating Control Led; Button - Resol VBus/Modbus Manuel

4

Indication and operating elements

The following elements are featured on / in the housing of the device:
 Operating control LED
 LAN connector
 Button

4.1

Operating control LED

Operating control LED
The operating control LED indicates the operating status of the device by issuing
flashing signals and colours.
LED flashing codes
Colour Permanent
Red
VBus signal available
®
Green
Red / green
LED off The device is booting
No mains voltage.
22


Flashing Fast flashing
No VBus signal
®
VBus signal and IP address
®
available
The device is
booting
4.2

Button

LAN LED
The button can be used for carrying out a reset in order to set back the configu-
ration of the device to the factory settings.
Î In order to reset the device, press the button for approx. 20 s.
The device will restart, the settings and passwords set back to factory settings. This
process may take several minutes.
Button