Leuze electronic BCL 900i Serie Mode D'emploi page 18

EN
4
LED indicators
READY
GOOD
TRIGGER
COM
STATUS
1)
POWER
1)
ETH 1
1)
ETH 2
1) Not shown, LEDs next to the M12 connections
5
Part number code
Please refer to the part number code for your device model.
Decommissioning, maintenance
CAUTION
 Never open the device yourself! If you do, there is a danger that laser radiation
will be emitted from the device in an uncontrollable way. The housing of the
BCL 900i contains no parts that need to be adjusted or maintained by the
user. If faults cannot be corrected, the device should be removed from oper-
ation and protected against possible start-up.
 Package the device for transport and storage in such a way that is protected
against shock and humidity. The original packaging offers optimum protec-
tion. Ensure compliance with the approved environmental conditions listed in
the specifications.
 Do not use aggressive cleaning agents such as thinner or acetone to clean
the device.
18
Green Operational readiness
Green Good Read - indicates successful reading
Yellow Reading gate active
Yellow Active communication on serial interface
Red Read status (No Read)
Green Supply voltage applied
Yellow Active communication Ethernet interface 1
Yellow Active communication Ethernet interface 2