Leuze electronic BCL 900i Serie Mode D'emploi page 13

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code readers of the BCL 900i series are conceived as stationary, high-speed
scanners with integrated decoders for all current bar codes used for automatic
object detection.
Areas of application
The bar code readers of the BCL 900i series are designed for the following areas
of application:
- Storage and conveying engineering, in particular for object identification on
fast-moving conveyor belts
- Pallet transport systems
- Automobile sector
- Omnidirectional reading
CAUTION
Observe intended use!
 Only operate the device in accordance with its intended use. The protection
of personnel and the device cannot be guaranteed if the device is operated
in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by
improper use.
 Read the technical description before commissioning the device. Knowledge
of this technical description is an element of proper use.
NOTICE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the employ-
er's liability insurance association.
ATTENTION
Operation notice in accordance with CSA / UL certification!
Supply only by means of an NEC "Class 2" or LPS power supply unit that is "UL
listed" or CSA certified.
The device must be supplied by a Class II power supply unit acc. to EN 60950.
EN
13