Using Your Chopper - Krups GVA2 Mode D'emploi

DESCRIPTION
A Base
B Bowl
C Lid seal
D Lid
E Emulsifying disk
F Blade
G Spatula
(according to model)

USING YOUR CHOPPER

Place the plastic bowl (B) on the base and lock in place by
■
turning counter-clockwise (see fig 1).
Then remove the lid, and slide the blade in place on the bowl
axis.
CAUTION: BLADES ARE EXTREMELY SHARP!
Next, assemble the emulsifying disk by clipping the axis into place
■
onto the disk (see fig 2).
NOTE: Once the emulsifying disk has been assem-
bled, the axis cannot be separated from the disk.
Add ingredients to the bowl.
■
Note the max fill line shown on the bowl (12 oz).
CAUTION: DO NOT EXCEED MAX FILL LINE. DO NOT
PROCESS HOT FOODS OR LIQUIDS. NEVER REACH
INTO THE BOWL WHILE THE CHOPPER IS PLUGGED
IN.
(according to model)
English
9