Functional Description - Black & Decker BDCD8C Manuel D'instructions

Masquer les pouces Voir aussi pour BDCD8C:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
WaRning:
Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure. Direct particles away from face
and body.
WaRning:
glasses. also use face or dust mask if cutting operation is dusty.
alWayS WeaR CeRtified Safety eQuipMent:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection
SymbolS
The label on your tool may include the following symbols. The symbols and their definitions
are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
or DC ...direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
............Read instruction manual before use
................Use proper eye protection
1. Switch
2. forward/reverse button
3. keyless Chuck
4. uSB charging port
5. Charger
6. Charging indicator
alWayS use safety glasses. everyday eye glasses are not safety

funCtional deSCRiption

A ...................amperes
W ..................watts
or AC .......alternating current
n o .................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
..................Use proper respiratory protection
..................Use proper hearing protection
3
1
5
4
2
6
4

Publicité

Table des Matières
loading

Table des Matières