TomTom Palm GPS 3263 Guide Rapide page 22

Safety Information
Heat-Reflective Shields
Some newer-model vehicles may have a heat-reflective shield embedded in the
windshield, which may prevent proper GPS signal reception if the receiver is
placed behind the windshield. To enable proper reception:
• Place the receiver in a different position, or
• Place the receiver behind the rearview mirror, where many vehicles have an
opening in the heat reflective shield, as indicated by a black outline.
Installation, Use, and Maintenance
[ ! ]
IMPORTANT
Do not attempt to service this product yourself. Do not
open, puncture, or disassemble the product.
In order for the GPS receiver to work properly, make sure that the receiver has an
unobstructed view of the sky. Protect the receiver from excessive heat, extreme
cold, dust, liquids, and direct sunlight. Do not use in a humid environment or on
an unstable surface. Make sure the receiver is always securely mounted to
prevent accidental movement. Handle all parts, cables, and connectors with care.
Use only supplied and recommended accessories and power supplies. Ensure
that any power supply is cooled by placing it in a ventilated area. The power
supply and the receiver unit may become warm or hot during operation. Unplug
the product from any external power source before cleaning. Only clean the
product with a dry cloth. Follow the instructions in this manual carefully.
20 GPS Navigator