Manufacturer's Warranty - Hilti TE 70-AVR Mode D'emploi

Trouble or fault
Drill bit is not released.
The service indicator blinks
red.
The service indicator lights
red.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
10 RoHS (Restriction of Hazardous Substances)
Click on the links to go to the table of hazardous substances: qr.hilti.com/r1021413 (TE70-AVR),
qr.hilti.com/r1021424 (TE70-ATC/AVR) and qr.hilti.com/r1021505 (TE80-ATC/AVR).
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
20 English
Printed: 30.08.2019 | Doc-Nr: PUB / 5150761 / 000 / 04
Possible cause
The side handle is not fitted cor-
rectly.
A fault has occurred in the tool.
The carbon brushes are worn.
Action to be taken
▶ Disengage the side handle and
refit it correctly so that the
clamping band and side handle
engage in the recess.
▶ Have the product repaired by
Hilti Service.
▶ Have checked, and if necessary
replaced, by a trained electrical
specialist.
2063038
*2063038*