Manufacturer's Warranty - Hilti DD 120 Mode D'emploi

Malfunction
The drilling system has too
much play.
10 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
18 English
Printed: 09.08.2019 | Doc-Nr: PUB / 5431632 / 000 / 02
Possible cause
The carriage has too much play.
Screws / bolts on the drill stand are
loose.
The drill stand is inadequately fas-
tened.
Action to be taken
▶ Adjust the play between the rail
and carriage. → page 14
▶ Check the security of screws
/ bolts on the drill stand and
tighten them if necessary.
▶ Fasten the drill stand more
securely.
2215140
*2215140*