Chest Belt; Accessories - Leckey Transat de bain Guide De L'utilisateur

GB
2.3
2.3
2.3.1 Calf Support Adjustment
2.3.2 Hip Belt
2.3.1

2.3.3 Chest Belt

a
2.3.3
3.0
3.1
3.1
3.2
Back Recline Adjustment
The back recline of the Leckey Bath Chair can be adjusted
to four positions from horizontal to 90 degrees. The back
recline is adjusted by pulling the lever, moving to the
required position and then releasing the lever, ensuring it
slots back into position.
The calf support can be adjusted into four positions by
pulling down on the levers (a), moving to the required
position and then releasing the lever into position.
The hip belt simply secures around the user with Velcro.
To attach the chest belt, loop it around the back of the seat
and Velcro securely at the front around the user. The strap
also has two foam wedges attached which may be used to
position the user more securely. To do so, position the
foam pads under the user's armpit, while looping the strap
around the back of the frame and secure with Velcro at the
front as shown. The lateral supports can also be positioned
out of the way at the back of the seat if the user does not
require this level of support.

Accessories

In addition to the hip belt and chest belt, an abduction
strap and head laterals are also available for the Leckey
Bath Chair
Abduction Strap
To attach the abduction strap, simply loop around the
tubular frame and secure at the back with Velcro.
The legs are then positioned and secured by the
smaller Velcro straps.
Head Laterals
The head laterals are secured in the same way by simply
looping around the tubular frame and securing at the back
with Velcro.