Applications - Beta 1850C Mode D'emploi

Applications

Here are some of the applications
you can use BETA hot air
guns for. This selection is by no
means exhaustive – no doubt you
can immediately think of other ex-
amples.
(A) Stripping paint: Paint is soft-
ened and can be removed with a
stripping knife and paint scraper
to leave a clean surface.
(B) Shrinking tubing on cables:
The shrink tubing is slipped over
the section you want to insulate
and heated with hot air. The tub-
ing shrinks by approx. 50 % in
diameter to give a sealed union.
Shrinking is particularly fast and
even using reflector nozzles.
Sealing and stabilising cable
breaks, insulating soldered joints,
gathering cable runs, sheathing
terminal blocks.
(C) Forming PVC: Sheeting,
piping or mouldings can be soft-
ened and formed with hot air.
(D) Shaping: Ski boots and
sports shoes can be shaped for a
perfect fit.
(E) De-soldering: Electronic com-
ponents are detached quickly and
neatly from circuit boards with a
reduction nozzle.
(J) Accessories
Your dealer has a wide range of accessories for you to choose from.
1 Reflector nozzle
Prod. no. 1850UF
(F) Soft soldering: First, clean
metal parts you want to join.
Then, using hot air, heat the point
you want to solder and offer up
the soldering wire. Use flux or a
soldering wire with a flux core to
prevent oxide forming.
(G) Welding and joining plastic:
All parts being welded must be of
the same plastic material. Use an
appropriate welding rod.
(H) Hot-tool welding on plastic
pipes or rods. The ends are
pressed against a coated hot tool
and then joined together.
Material
Rigid PVC
Plasticised
PVC
Soft PE
(LDPE)
Polyethylene
Hard PE
(HDPE)
Polyethylene
PP
Polypropylene
ABS
2 Window nozzle, 80 mm
Prod. no. 1850UB
Application types
Pipes, fittings, sheets, building pro-
files, technical mouldings
Welding temperature 300 °C
Floor coverings, wallpapers,
hoses, sheets, toys
Welding temperature 400 °C
Domestic and electrotechnical
articles, toys
Welding temperature 250 °C
Baths, baskets, canisters, insulat-
ing material, pipes
Welding temperature 300 °C
HT drainage pipes, moulded
seats, packaging, car components
Welding temperature 250 °C
Car components, equipment
housings, cases
Welding temperature 350 °Cr
3 Surface nozzle, 80 mm
Prod. no. 1850UP
- 11 -
(I) Joining sheeting: The sheets
are overlapped and welded
together. A slit nozzle is used to
direct hot air under the overlap,
then the two sheets are firmly
pressed together with a feed
roller. Also possible: Repairing
PVC tarpaulins by overlap weld-
ing with a slit nozzle.
Distinguishing characteristics
Carbonises in the flame, pungent odour;
crashing sound
Smoking, yellowish-green flame,
pungent odour; silent
Light yellow flame, drips continue to
burn, smells of a candle being extin-
guished; dull sound
Light yellow flame, drips continue to
burn, smells of a candle being extin-
guished; crashing sound
Bright flame with a blue core,
drips continue to burn, pungent odour;
crashing sound
Black, fluffy smoke, sweet odour;
crashing sound
4 Reduction nozzle,
14 mm
Prod. no. 1850UR
GB