Safety Warnings - Beta 1850C Mode D'emploi

Safety warnings

!
Read and observe this informa-
tion before using the tool.
Failure to observe the operating
instructions may result in the
tool becoming a source of
danger.
When using electric power tools,
observe the following basic safety
precautions to avoid electric
shock and the risk of injury and
fire. Fire may be caused if the tool
is not used with care.
Take ambient conditions
into account.
Do not expose electric power tools
to rain.
Do not use electric power tools
when they are damp or in a damp
or wet environment.
Exercise care when using the tool
in the proximity of flammable
materials. Do not direct hot air
onto the same spot for any pro-
longed period.
Do not use in the presence of an
explosive atmosphere.
Heat may be conducted to flam-
mable materials that are out of
sight.
Protect yourself from
electric shock.
Avoid touching earthed objects,
such as pipes, radiators, cookers
or refrigerators. Do not leave the
tool unattended while in operation.
Store your tools is
a safe place.
Place tool on stand after use and
allow to cool before putting is away.
Tools that are not in use should be
stored in a dry, locked room and
out of the reach of children.
Do not overload your
tools.
Work results and safety will be
enhanced if you stay within the
specified output range.
After using the tool for a prolonged
period at maximum temperature,
you should reduce the tempera-
ture before switching the tool off.
This will prolong the life of the
heating element.
Do not carry the tool by the power
cord. Do not unplug the tool by
pulling on the power cord. Protect
the power cord from heat, oil and
sharp edges.
- 10 -
Beware of toxic gases
and fire hazards.
Toxic gases may occur when
working on plastics, paints, var-
nishes or similar materials. Beware
of fire and ignition hazards.
For your own safety, only use
accessories and attachments that
are specified in the operating
instructions or recommended or
specified by the tool manufacturer.
Using attachments or accessories
other than those recommended in
the operating instructions or cata-
logue may result in personal
injury.
Repairs must only be
carried out by a
qualified electrician.
This electric power tool complies
with the relevant safety regulations.
Repairs must only be performed
by a qualified electrician, other-
wise the user may run the risk of
accidents.
Keep these safety warnings in a
safe place.