Operation Of The Heat Meter / Calling Up The Display Loop; Level Operating Scheme Of The Standard Levels - Honeywell Home Resideo EW701 Instructions De Service Et De Montage

Operation of the heat meter / calling up the display loop

Opening the fast readout display loop
The display is always off as standard (sleep mode).
Press the <H> key briefly or
Current value
Display test -
everything on
Display test -
everything off
Due date
Due date value
5 sec pulsating

Level operating scheme of the standard levels

Press the <H> key or
EN 52
5 sec.
0.5 sec.
0.5 sec
5 sec
To change the level: Press key < H >
MU2H-0501ge23 R1020
the <V> key briefly
The fast readout display starts
with the current consumption
value.
After 10 repetitions, the display
automatically changes back to
sleep mode.
You can change to the level op-
erating scheme at any time. To
do so, press the < H > or < V >
key for longer than 3 seconds.
the < V > key for longer than 3 seconds.
V1.00 / 3.5.2018