Sealing The Temperature Sensor In A Ball Valve - Honeywell Home Resideo EW701 Instructions De Service Et De Montage

Sealing the temperature sensor in a ball valve

2
(1) Thread the wire of the seal through the seal holes on the ball valve and the
sensor screw fitting.
(2) Insert the wire through the available opening in the seal body.
(3) Wind the wire tightly by turning the wing in the seal.
(4) Break the wing off the seal.
Sealing is guaranteed by breaking the seal off.
V1.00 / 3.5.2018
1
MU2H-0501ge23 R1020
3
4
47 EN