First Time Usage; Hdd Format - Fantec MM-HDRL Manuel Utilisateur

1.5 First Time Usage

1.5.1 HDD Format

For users who bought the player without HDD inside, and want to install the SATA HDD om
their own, please see 'HDD Format' in '6.5 Changing System Settings' for details.
1.5.2 Remote Control
First time usage of Remote control
Install the batteries before using the remote control, installation steps are as the picture shows:
1.5.3 Power on/off, language control
1. Power on
After connecting the power supply cord, the player will soon enter standby mode, and the red
STANDBY indicator on the front panel will turn on. Then press the POWER/STANDBY button
on the front panel or remote control to wake up the system, wait for a couple of seconds to
enter the system and the blue ON indicator on the front panel will turn on.
2. Power off
When the system is running, press the POWER/STANDBY button on the front panel or remote
control, the player will enter standby mode.
3. Language control
The system language of this player can be set to English or other languages. In the setup
interface is language setup, the selected language will take effect immediately.
EN 82 / 214