Fantec MM-HDRL Manuel Utilisateur page 111

Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or
computer-to-computer mode, is used to connect wireless clients directly
together, without the need for a wireless router or access point.
3) Ad Hoc Setup
Select Manual if you wish to change the default settings.
Then set the Wireless SSID, Wireless Security, and Host IP for the Ad Hoc
connection.
Note: Both the player and your PC need to use the Ad Hoc mode, share a
common SSID, and be put into the same IP range.
4) Save and Startup
Select OK to confirm the above settings.
EN 111 / 214