Connection And Usage Of The Media Player - Fantec MM-FH36US Mode D'emploi

Connection and usage of the Media Player

This product possesses of an USB interface, so it can support hot plug & play. It is able
to connect and use in the follow system.
In Microsoft operation system
A. Startup the PC
Make sure the pc works normally
B. Connect the USB cable
Plug one end of the cable into the player's interface
Plug the other end of the cable into the USB of the PC
C. Connect the power cable
D. Common usage
The operation is the same as the common hard disk accessing, reading and writing
The LED indicator flickers during the reading and writing process.
The LED indicator stops flickering or slow down flickering during no reading or
writing operation and stand by status.
Please don't draw out the FANTEC MM-FH35US from the PC when the device is
under reading or writing status. Otherwise, it may cause damage to the hard disk
or loss of data.
Exit and draw out the product
As a USB device, it supports hot plug. Please follow the procedure below to ensure a
normal exit from the system and protect the integrality of the system and the safety of
the product.
In Microsoft operation system
A． Make sure the product is not under reading or writing status
No reading or writing operation command implements.
No flickering on the player's LED indicator
B． Click the green icon right down the system screen
The green icon illustrates as follow.
Right click the green icon, the option of USB device directory appears.
EN/9
www.fantec.de