Zephyr Essentials Pyramid ZPY-E30AB Guide D'utilisation, D'entretien Et D'installation page 13

Note: To use hood in air recirculating mode please purchase recirculating kit ZRC-0200
For Tamburo (ZTA) and Terazzo (ZTE) only:
Unscrew and remove the front cover
charcoal fi lter
bracket
center
panel
2. Using components from ZRC-0200, install (2)
charcoal fi lter brackets and center panel to
bottom of the hood with (4) screws for each
component. Screws are pre-installed to the hood.
Remove screws fi rst to install brackets and center
panel then re-install screws..
4. Install the mesh fi lters
front slot
back slot
1. Remove air diverter plate slot covers. Remove metal
air diverter plate from front slot and re-position to back
slot. Re-install air diverter plate covers.
charcoal fi lter
bracket
3. Install charcoal fi lters into charcoal fi lter brackets
11
metal air
diverter
plate