Install Filters; Electrical Connection - Forno FRHWM5029-36 Manuel D'instructions

INSTALL FILTERS

• Reassemble grease tray and baffle filters inside the hood.

Electrical Connection

* Electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and
standards.
Turn off electrical power at service entrance before wiring.
* If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially supplied with the hood.
* This hood must be ground. Do not remove ground prong from the plug.
To prevent the risk of fire, electric shock, or injury to persons, or for cleaning and maintenance such as
lubrication, unplug or disconnect the appliance from the power supply before servicing.
OPERATIONS
K1: Power button
When the range hood is on, press the K1 button to enter Power-Off Delay Timer, the Timer working
time is 15 minutes, the range hood will turn off when the time reaches 0. If you press the K1 button
again, the range hood will turn off.
13