Cleaning And Maintenance - Bimar AP11 Notice D'instructions

Smart Partner will analyse the level of lighting in the room where the user is sleeping
and if it detects low lighting between 22:00 and 6:00, the device will react in the
following ways:
a) ventilation will be set to low speed
b) the temperature will be decreased by 2 degrees if the room temperature is above
28℃ in heating mode
c) the temperature will be increased by 2 degrees if the ambient temperature is
below 20℃ in cooling mode
15. "Constant temperature" mode
This function allows the constant room temperature to be controlled by Smart
Partner instead of by the air conditioner, the device will self-regulate to maintain a
constant temperature. If the user sets the room temperature between 23°C and
26°C between 9:00 and 18:00, the air conditioner will automatically cool down when
the temperature is above 26°C or will heat up when the temperature is lower than
23°C. After this time interval of 9:00 to 18:00, the air conditioner will automatically
switch to sleep mode.
16. "Temperature curve" mode.
This function allows the user to set the temperature for each hour for a period of at
least 5 hours. The device will then set the temperature according to the selected
settings (hot/cold).
Child lock.
This feature allows the user to lock all AC remote controls. You can only choose to
17. turn on and off.

CLEANING AND MAINTENANCE

Important: before performing routine cleaning, remove the plug from the mains.
• To clean use a soft, damp cloth; do not use steel wool or abrasive products.
• Do not immerse any part of the plug in water or other liquid: in such an event, do not place
your hand into the liquid but first remove the plug from the plug point. Dry the appliance
thoroughly and check that the electrical parts are dry: if in doubt consult a qualified
professional.
• Do not dump non-biodegradable products; be sure to dispose of them in compliance with
existing regulations. At the end of its life, the product must not be disposed of as part of
ordinary waste. It should be handed in to specific collection centres set up by the
municipality, or to retailers who provide such a service following the purchase of a new
device. Disposing of a household appliance separately avoids possible negative
consequences for the environment and human health resulting from inappropriate disposal
and allows the recovery of the materials from which it is made in order to obtain significant
savings in energy and resources. As a reminder of the obligation to dispose of appliances
separately, the product is marked with a crossed-out wheelie bin symbol.
18