Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the
timer key: when the air conditioner has finished, it goes into sleep mode.
-
Each press selects:30 mins, 60 mins, 1 hour 30 mins, 2 hours, 3 hours, 4 hours, 5
hours, 6 hours, 7 hours, 8 hours.
The
programming key: sets the on / off periods of each day of the week.
-
Programming can be:
i) simple (timer on and timer off and timer on/off): select the on/off periods for each
day of the week
ii) advanced (timer on/off): selects when it should switch on and off, the temperature
you require in that room and the mode, for each day of the week.
The
key activates or deactivates airflow oscillation.
-
The
key changes the fan speed:1, 2, 3, A (automatic).
-
The buttons at the bottom allow you to choose between the simple functions previously
viewed or the advanced functions ("Device Settings") described below:
Temperature curves: regulates the temperature of the time slots for each day of the
-
week: the air conditioner operates according to the set value. Outside the opening
hours, the air conditioner is put on stand-by. This function takes priority over
"constant temperature".
Constant temperature. Adjusts the temperature for intervals of at least one hour and
-
the mode of use (heat/cool) for each day of the week.
"Automatic sleep mode" function: The light sensor analyses the lighting level in the
-
room and if it detects no lighting between 22:00 and 6:00, it activates:
i) ventilation
ii) a 2℃ reduction of the set temperature if the "heat" mode is active and if the room
temperature is higher than 28℃.
iii) a 2°C increase of the set temperature if the "cool" mode is active and if the room
temperature is below 20℃.
Timer: allows you to set on/off timers.
-
Set brightness: allows you to use standard or customised colours.
-
FREQUENTLY ASKED QUESTIONS
1
Will Smart Partner work with my air conditioner? What if it doesn't work?
Smart Partner is compatible with almost all split air conditioners equipped with an
infra-red remote control. If you have problems pairing the device, here are a few
things to check:
a) If the remote control battery is almost empty, the tuning is affected: in this case,
change the batteries.
b) Make sure that the remote control is close and pointed at the Smart Partner when
tuning.
C)Ensure that the Wi-Fi network is working, operates at 2.4GHz, has a strong signal
and that the router is for home use (i.e. it has no access restrictions other than
password).
If the air conditioner is incompatible, please provide us with the air conditioner model
and the reference number of your remote control (usually on the back of the remote
control).We will upload the IR code to our cloud to make it compatible (usually within
48 hours).
16
Publicité
Table des Matières
