App Functions - Bimar AP11 Notice D'instructions

IDENTIFYING THE AIR CONDITIONER
If the procedure is performed correctly, rename the device, and set the device password.
Once set up, select "Analyse air conditioner" to confirm.
Point the air conditioner remote control at
the smart partner, and press the "on" key.

APP FUNCTIONS

The screen shows the active functions: temperature and relative humidity percentage in
the room in which the smart partner is being used. It also allows you to control the
functions and user modes of the air conditioner or to control more advanced functions
using the short cut.
The graphics at the top show:
Active modes: OFF(Stand-by), Cool, Dry, Wind, Heat, Auto,
-
The desired temperature (°C) for that room, and the temperature and the humidity
-
percentage detected.
Active functions
-
The central keys activate/select the following air conditioner functions:
required temperature in the room (°C): modified by scrolling right or left.
-
the key activates the connected device or puts it in stand-by mode.
-
the mode key selects Cool/Dry/Wind/Heat/Auto (if the device has these
-
settings).
15